***Not For SaleTo: New York ( due to pesticide regulations )
Bifen IT - Quart ( 32 oz. )
This Listing is for 1- 32 oz. Bottle of Bifen Insecticide Termiticide Concentrate Makes 32-96 Gallons Depending on the Application Needs - Generic Talstar
Mosquito and Tick Control
Bifen IT is a popular choice for mosquito and tick control. Spray the lawns and vegetation with Bifen IT for mosquito and tick control. Mix 1/2 - 2 ounces per gallon; use 1-3 gallons per 1,000 square feet. The amount depends on the density of vegetation. Since Mosquitoes and Ticks like to habitat in dense foliage and shrubs, don't forget to spray the vegetation as well as the lawn. Repeat this application monthly.
Bifen IT insecticide is comparable to the very popular Talstar P, but much less expensive. Bifen IT contains 7.9% bifenthrin, has a long 3 months residual, and kills over 75 insect pests including termites. Bifen IT and the other bifenthrin products can be used both indoors and outdoors, in lawn and garden areas, and even in food-handling areas. 1 Qt. of Bifenthrin insecticide yields 32-96 gallons. If you are looking for a low cost alternative to Talstar One, then look no further. Bifen I/T is tough on pests, but not on your wallet.
Targets over 75 different pests -- everything from spiders, mosquitoes, cockroaches, ticks and fleas to pillbugs, chinch bugs, earwigs, millipedes and termites.
Use Inside, outside, around the perimeter, ornamental, and food handling areas.
Mfg: Control Solutions
Bifen IT and the very popular Talstar One Multi-Insecticide have the exact same label and the same amount of active ingredient. Bifenthrin - 7.9% synthetic pyrethroid.
DESCRIPTION: Talstar P, Bifen I/T and other Bifenthrin generics control over 75 common insect pests, including termites. Bifen can be used as an indoor and outdoor pest control, turf and ornamental application, and for treating pests in food-handling areas. Both Talstar One and Bifen I/T are microencapsulated products that do not break down easily with rain once they bond to surfaces. Both Talstar One and Bifen IT are clear substances that leave no stains on painted surfaces.
Bifen IT can last up to 6 months outside. It is very effective on Japanese Beetles, clover mites ants, termites, fleas, ticks, spiders, scorpions, roaches, millipedes, earwigs, army worms, mealybugs, mites, grasshoppers, pillbugs, cutworms, sod webworms, weevils, leaf miners, box elder bugs, bees, wasps, sowbugs, crickets, and turf and ornamental pests.
Apply with a compressed air sprayer. Apply to outside foundation and all entry points such as around windows, doors, etc. Always read the label before use.
Listed below are some of the use sites that are allowed:
-aircraft (do not use in aircraft cabins) -hotels
-apartment -industrial buildings
-bakeries -meat/poultry/egg processing plants
-bottling facilities -mobile/motor homes
-breweries -nursing homes
-candy plants -restaurants
-dairy product processing plants -ships
-food manufacturing plants -trailers
-food processing plants -trucks
-food service establishments -vessels
-grain mills -wineries
Bifen I/T may be used to control ants, bees, beetles, boxelder bugs, carpet beetles, centipedes, clothes moths, cockroaches, crickets, earwigs, firebrats, flies, gnats, midges, millipedes, pillbugs, scorpions, silverfish, sowbugs, spiders, ticks, and wasps.
In structures and buildings and on modes of transportation, use a 0.02% to 0.06% suspension (0.33 to 1 fl. oz. per gallon of water) using a crack and crevice, pinstream, spot, coarse, low-pressure spray (25 p.s.i. or less) or with a paint brush.
Indoor Treatments: Apply where pests hide. These areas include, but are not limited to, baseboards, corners, storage areas, closets, around water pipes, doors and windows, attics and eaves, behind and under refrigerators, cabinets, sinks, furnaces, stoves, the underside of shelves, and drawers. Treat with a low pressure, coarse, crack and crevice or spot spray. Pay close attention to cracks and crevices. Not for use as a space spray.
Mixing Directions: See mixing directions in “Pest Control on Outside Surfaces and Around Buildings” section.
To make a dilution for brush or spray treatments:
Dilute Bifen I/T with water.
-Fill sprayer with the required amount of water.
-Add Bifen I/T.
-To ensure proper mixing, close sprayer and shake before use.
-Only mix the amount of solution that is necessary for treatment.
In order to achieve and/or maintain control in times of high pest pressure, retreatment may be needed.
Repeat application should only take place if there are signs of renewed insect activity and must not exceed one application per 7 days.
Ants: Apply to any ant trails, around doors and windows and other places that ants frequent.
Bees and Wasps: Apply to nests in late evening when these pests are at rest. Spray nests, entrances to nests and surrounding areas thoroughly. Contact as many insects as possible. Retreat if signs of renewed activity exist.
Boxelder Bugs, Centipedes, Earwigs, Beetles, Millipedes, Pillbugs, and Sowbugs: Treat near doors and windows, storage areas, baseboards and other sites where these pests may be found.
Cockroaches, Crickets, Firebrats, Scorpions, Silverfish, Spiders, and Ticks: Use a coarse low- pressure, crack and crevice or spot spray, paying close attention to cracks and crevices. Treat where pests hide. These areas include, but are not limited to, attics and eaves, baseboards, closets, corners, storage areas, around water pipes, doors and windows, behind and under cabinets, furnaces, refrigerators, sinks, stoves, and the underside of shelves and drawers.
Apply with a sprayer. Apply to outside foundation and all entry points such as around windows, doors, etc. Always read the label completely before use.
Yield No oral advice or written information given by American Pest supplies shall create a warranty.
1 bottle (4 oz.) concentrate yields 4-8 gallons of finished solution.
1 pint (16 oz.) concentrate yields 16-32 gallons of finished solution.
1 quart (32 oz.) concentrate yields 32-96 gallons of finished solution.
¾ gallon (96 oz.) concentrate yields 96-192 gallons of finished solution.
1 gallon (128 oz.) concentrate yields 128-384 gallons of finished solution.
Standard Application Dilution rates
0.33 oz./gallon of water – 0.02% - prevention, low level infestions
0.5 oz./gallon of water – 0.031% – general indoor or outdoor use
1.0 oz./gallon of water - 0.06% - severe infestations, less frequent treatments, longer residual, quicker knockdown
1 gallon of finished solution should cover 1,000 square feet when using a hand pump sprayer
In and around such areas as homes, commercial and industrial buildings, recreational areas, athletic fields, lawns and ornamentals; livestock and poultry houses; gardens, parks, lawns, grounds and other ornamental sites; flowers, foliage pants, non-bearing fruit and nut trees, shrubs, ornamental trees; interior and exterior plantscapes such as those in hotels, office buildings, shopping malls, etc.; both food/feed and nonfood areas of food/feed handling establishments; aircraft (excluding cabins), apartments, bakeries, bottling facilities, breweries, buses, cafeterias, candy plants, canneries, dairy product processing plants, food manufacturing plants, food processing plants, food service establishments, granaries, grain mills, hospitals, hotels, industrial buildings, laboratories, meat/poultry/egg processing plants, mobile/motor homes, nursing homes, offices, railcars, restaurants, schools, ships, trailers, trucks, vessels, warehouses, wineries
Use 0.33 to 1 fluid oz. per gallon of water for residual pest control in buildings and structures and on modes of transport. Apply either as a crack and crevice, pinstream, spot, coarse, low pressure spray (25 psi or less) or with a paint brush.
Apply as a coarse, low pressure, crack and crevice or spot spray to areas where pests hide, such as baseboards, corners, storage areas, closets, around water pipes, doors and windows, attics and eaves, behind and under refrigerators, cabinets, sinks, furnaces, stoves, the underside of shelves, drawers and similar areas.
Do not use as a space spray.
Pay particular attention to cracks and crevices.
Limit repeat application to no more than once per seven days and only if there are signs of renewed insect activity.
* Bifen IT may be converted to a foam for residual treatment of voids or as a spot spray when visual marking of application is desired.
* Bifen IT is NOT labeled for control of bedbugs in residential or commercial areas except for in livestock and poultry housing structures.
General application for crawling pests - Mix 0.5 to 1 oz. of Bifen IT in one gallon of water and apply to the outside foundation of the home, approx. 3 feet up the side of the house and 2 feet out from the house. Also spray entry points into the home such as around windows, pipes, doorways, etc. For general preventative treatment, apply Bifen IT once every 3 months.
Mosquitoes: To control mosquitoes around buildings, landscapes, and lawns, dilute 0.33 to 1.0 fl. oz. per gallon of water and use one gallon of dilution per 1000 square feet as a general spray. Bifen IT can be mixed at lower concentrations and applied at higher volumes to ensure application of the proper amount of product to a given area.
Bagworms: Use 0.125 to 0.25 oz. per 1,000 square feet (or 5.4 - 10.8 oz. per 100 gal.). Apply as a full coverage foliar spray. Use of a Chapin Slide Pump Sprayer will help reach higher into trees. For optimum control treat when larvae have started to hatch and are young, directing spray to contact as many larvae as possible.
Chinch Bugs: Use 0.25 to 0.5 oz. per 1,000 square feet. In order to optimize the penetration of the insecticide to location of the chinch bugs, irrigation of the grass prior to treatment may be necessary. If grass is being kept at a long mowing height or if the thatch layer is excessive, use higher volume treatments. It may be necessary to use higher application rates (up to 1 fl. oz. per 1,000 square feet) to control populations made up of both adults and nymphs in mid-summer.
Lawn applications: A hose end sprayer, such as the Chapin hose end sprayer, may be used to apply Bifen IT for lawn pests. Use up to 1.0 oz. per 1,000 square feet. Higher volume applications may be more effective with some pests, so you may want to calibrate the sprayer to a lower rate (for example, 0.25 oz/gal.) and use more water to cover a 1,000 square foot area.
Termite Applications: Bifen IT may be used for pre-construction or post-construction prevention of subterranean termites. Use 1.0 oz/gal. of water (0.06% solution) for most termite applications. For preconstruction horizontal barriers (such as under a concrete slab), use 1 gallon of solution per 10 square feet. For perimeter barrier treatments, use 4 gallons of solution per 10 linear feet. See our article How to Do a Termite Treatment, for further instructions on perimeter termite treatments. See product label for full instructions on using Bifen IT to control subterranean termites.
Pet Safe when dry
Virtually no odor or staining
Easy-to-remember mixing rates
Convenient squeeze and pour containers (pint and quart) make measuring and mixing easy
Bifen IT may be tank-mixed with adjuvants and with other pesticides, including insect growth regulators.
Very broad labeling for pests and use areas means you can use one product for many jobs
Labeled for use in food or feed handling establishments
Long residual for fewer treatments
Allow at least 30 minutes after application before allowing pets or children into treatment area. For best results, allow 24 hours after outdoor application before expected rainfall or watering. Some outdoor applications may require irrigation before or after application. (See product label)
Use with an IGR such as NyGuard IGR for control of all life stages of insects such as fleas.
Store out of direct sunlight and extreme temperatures.
Concentrate should be viable for 3-5 years. If separation occurs, shake well before using.
Do not apply more than 1 oz. Bifen IT per 1,000 square feet.
To avoid or delay pest resistance, especially on ornamentals and trees, it is recommended to use an alternate class of pesticide in any application program.
Not labeled for use on commercially grown plants or edible plants.
Compare to: Talstar P (Talstar One) *Bifen IT has the EXACT SAME label and the same amount of active ingredient as Talstar P, the more expensive brand.
American Pest Supplies is a seller of various products. American Pest Supplies does not warranty the safety or the effectiveness of any of the products listed on this website. Any warranty or guarantee of safety or purpose for any particular use lies solely with the manufacturer.
Pest Control Products always have a label attached and it is here by noted that for all purposes the label is the law and according to federal law the product label must be followed and that any pesticide product must be used according to the label directions.
Any advice or recommendations given by American Pest supplies or anyone representing American Pest Supplies will never be intended to take the place of the pesticide label.The pesticide label is the law and a legal document. Always read and follow the label directions before using any pesticide product.
Some of the products sold by American Pest Supplies could require special licensing training or registration of the user in that users State, County, City, Etc. It is the sole responsibility of the purchaser and/or the end user to provide a license, permit, registration etc. If required by that purchasers local or state authorities.It is the sole responsibility of the user to verify that any products purchased are licensed for use in their State, County or City.
The customer assumes all responsibility for safe, proper and legal use of any products they purchase. The products we sell are intended for personal use only, in accordance with the customer's state laws and restrictions.